Full Description
View Full Description
Pocket-Sized Mobile Studio
The iRig Pro I/O Interface for IOS, Android, PC and Mac is one of the most versatile portable interfaces on the market. The highly-compact design will easily fit in your pocket for the ultimate portable recording experience. It can connect to virtually any source, including a Neutrik combo input for guitars, microphone and other instruments such as keyboards. It also features built-in Phantom Power, allowing you to utilise studio-grade condenser microphones. It can be used with virtually any device thanks to its support for iOS, Android, PC and Mac. It even features a dedicated 1/8-inch stereo headphone output with preamp and level control, allowing you to monitor your sources, even with the latest iOS devices.
High-Resolution Audio Performance
The exceptional audio fidelity the iRig Pro produces, is down to the premium-grade A/D and D/A converters. They allow you to achieve sample rates ranging up to 24-bit/96kHz. This ensures you capture every nuance from your source material, from electric guitars to recording vocals. It will capture any source in immense detail, providing studio-grade recording capabilities on the move. The built-in Phantom Power means you can connect high-end studio mics, complete with a gain control knob for controlling your input levels. A ¼-inch Hi-Z input is also included, handling both passive and active pickup configurations. It even features MIDI I/O for connecting the interface to other equipment such as sequencers and keyboards.
Compact Design With Software Bundle
The highly compact design makes the iRig Pro one of the most portable audio interfaces available on the market. Its sleek and streamlined design will fit easily within your pocket, and features multicolour LEDs, indicating when Gain, MIDI and Phantom Power is in use. The dedicated headphone output features its own volume control and the top Gain wheel allows you to dial in your levels with optimal precision. It can be powered via USB Bus power or using 2 x AA batteries, for added flexibility. It comes complete with Lightning and USB cables for added convenience, as well as a range of audio software. The software bundle includes full versions of AmpliTube for iOS, AmpliTube 4 for Mac/PC, SampleTank 3 SE, T-RackS Deluxe with Mic Room, and more. Additionally, it includes a Velcro strip, for securing the interface onto a mic stand.
Features
- High definition 24-bit/96kHz audio plus MIDI interface for iPhone, iPad, Mac, PC and Android devices
- Connects to everything, yet easily fits in your laptop bag, gig bag or pocket
- Neutrik™ combo input for guitar, microphone or other instruments with a professional quality preamp, phantom power and gain control
- iPhone 7 ready with integrated headphone output with volume control
- Powered via USB bus, two AA batteries or the optional iRig PSU 3A (PSU simultaneously charges iOS device)
- Detachable Lightning and USB cables included for connection to iPhone, iPad, Mac and PC (MFi certified)
- Comes with a Velcro strip to secure iRig Pro I/O to a mic stand
- Comes with over 550-EUR worth of full version Software & Apps
Specifications
Microphone Input
- Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: 3.2 kOhms
- Gain Range: 40 dB
- Phantom Power: +48V ± 4V
- Frequency Response: 20 Hz - 20 kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Instrument Input
- Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
- Instrument Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 1 MOhms
- Gain Range: 27 dB
- Frequency Response: 20 Hz - 20 kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
- Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
- Headphone Level: Control numbered thumbwheel
- Headphone Level: Power 100mW into 50 Ohms
MIDI Input/Output
- Connector: 2x2.5mm TS Jack
Other Input/Output
- DC Barrel: 1x DC barrel. For power and device charging.
- Device Connector: mini-DIN
Common
- Conversion: 24-bit A/D, 24-bit D/A
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
- Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)
Physical
- Size 43mm/1.69" x 127mm/5" x 37mm/1.46"
- Weight: ~120g/4.23oz (batteries excluded)
- Lightning to Mini-DIN Connection Cable: 60cm/23.62"
- USB to Mini-DIN Connection Cable: 60cm/23.62"
- 2.5mm jack to MIDI Cable: 160cm/63"