DISC dbx iEQ31 Intelligent Dual 31-Band Digital Graphic EQ

Full Description

Features

• Advanced Feedback Suppression (AFS™)
• Type V™ Noise Reduction
• PeakStopPlus® Limiting
• 1/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of +6 or +15dB
• 18 dB per octave 40Hz low-cut filter
• +12dB input gain range
• XLR, TRS and Euroblock Inputs and Outputs
• Internal Toroidal Transformer
• Dyanmic range of greater than 113dB
• User Power Up Features
• Relay Bypass for Power Failure System Protection

Specifications

• Input Connectors: 1/4" TRS, female XLR (pin 2 hot), and Euroblock
• Input Type: Electronically balanced/unbalanced, RF filtered
• Insert Impedance: Balanced 40k ohm, unbalanced 20k ohm
• Max Input: >+22dBu balanced or unbalanced
• CMRR: >40dB, typically >55dB at 1kHz
• Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and Euroblock
• Output Type: Active-balanaced/unbalanced, RF filtered
• Output Impedance: Balanced >120 ohm, unbalanced >60 ohm
• Max Output: >+20dBu balanced/unbalanced into 2k ohm or greater
• Frequency Response: 20Hz to 20kHz, +0.5/0.25dB
• Dynamic Range: >113dB, "A" weighted
• THD+Noise: <0.003%, typical at +4dBu, 1kHz
• Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
• Noise Reduction: Up to 10dB of dynamic broadband noise reduction
• Digital Resolution: 24 bits
• Sample Rate: 48kHz
• Latency: 2msec
• Operating Voltage: 120VAC 60Hz, 220/240VAC 50/60Hz
• Power Consumption: 17 Watts
• Power Connector: IEC receptacle
• Dimensions: 3.5" H x 19" W x 7.9" D