Drawmer 1972 Dual Mic/Line/Instrument Preamp

Full Description

Two ultra-clean mic preamps

Utilising cutting-edge technology created by ‘THAT Corporation’, the Drawmer 1972 provides two ultra-clean microphone preamps within the two-channel configuration. The dual mic preamps provide natural and transparent sound reproduction, allowing you to capture every nuance of your performance with exceptional sonic accuracy. The mic pres provide a whopping 66db of gain in stepped intervals of 6db each. There is also an additional +/-12dB trim available at the output.

As well as the mic pres, the 1972 also features separate line/mic input XLRs located on the rear of the unit. You can also process and record instruments using the premium-grade DI input on the front panel. From ribbon and tube mics to handheld dynamic microphones, the Dramwer 1972 can process virtually any sound source and get the best out of it.

Lift control – low-level dynamic gain

The one feature that makes the 1972 stand out from the crowd is its unique ‘Lift’ control. Acting as a low-level gain parameter, the Lift control is perfect for low-level sound source. It retains the natural tonality and transparent sound of your source whilst ensuring every nuance is heard. Ideal for highly dynamic recordings, the Lift control is effective for use with pianos, vocals and ambience.

Shape your sound with HiCut and LoCut controls

Post-processing can be tedious and can bring out unwanted artefacts and frequencies that can change the overall sound. This is why it is paramount to get the best possible recording from the source, minimising the need to alter the sound during post production. The Drawmer 1972 features LoCut and HiCut controls which allow you to shape your sound before/while you record. You can remove unwanted low-end rumble or minimise high-end hiss using the two, high-precision rotary controls. An additional control – ‘Shape’ allows you to subtly bring out bass/treble frequencies with the onboard tilt EQ.

Rack-mountable chassis and vintage-style VU meters

Drawing inspiration from classic hardware, the 1972 features a retro-style design with a rackmountable chassis – perfect for the studio. The two backlit analog VU meters allow you to monitor your levels at a glance, complete with a switchable +10dB rescale mode for added flexibility. It provides support for a wide range of gear, with the 1972 featuring both Phantom Power and Phase Reverse. The internal low-hu, toroidal linear power supply features a voltage selector switch for maximum compatibility.

Features

• Dual pristine mic preamps (THAT Corporation) – 66dB of gain in 6dB intervals
• Separate line/mic input XLRs on the rear of the preamp
• Premium-grade DI instrument input on the front panel
• Ideal for use with a wide range of sources with support for a variety of high-end mics
• Switchable mic impedance for accurate mic matching
• ’Lift’ boost control is perfect for low-level sound sources, ensuring no clipping when recording
• Variable LoCut and HiCut filters
• Shape your sound further using the ‘Shape’ switches
• Onboard Phantom Power and Phase Reverse
• Monitor your levels using the vintage-style backlit VU meters
• Time delay relays on outputs for clean power up/down
• Rack-mountable chassis (1U)

Specifications

• Input:
  • Input Impedance: 20k ohms or greater
  • Maximum Input Level: +21dBu
• Output:
  • Output Impedance: 100 ohms
  • Maximum Output Level: +21dBu into 10k Ohms Load
• Frequency Response: 20Hz to 20kHz +/-0.5dB
• Crosstalk: < -85dB @ 1kHz
• Noise at Unity Gain: 20Hz - 20kHz (> 92dB)
• Distortion (THD and Noise @ 1kHz):
  • 0dB: 0.07 percent
  • 10dB: 0.07 percent
• Mic Ein: -130dB A weighted
• Power Requirements: 230Volt or 115V at 50-60hZ, 15VA
• Fuse Rating:
  • T160mA for 230Volt,
  • T315mA for 115Volt
  • Conforming to IEC 127-2
• Fuse Type: 20mm x 5mm, Class 3 Timed-Blo, 250Volt working
• Dimensions: 482mm (W) x 44mm (H) x 200mm (D)
• Weight: 2.6Kgs
• Product Code: 1972