Radial Pro48 Active DI Box - Secondhand

Full Description

For the musician who demands the best

Performance and practicality combined. At the heart of the Pro48 is a custom-built transformer, delivering a frequency response of 20Hz to 40kHz. No matter how high your signal level gets, you can rest assured that this active workhorse is able to withstand tremendous transients without distortion. The Pro48 is the ultimate companion for battery bowered active basses and acoustic guitars that often overload other DI boxes. Instead, Radial promise an unfaltering sonic performance with a smooth, linear response and increased headroom.

Features

• Compact active DI, perfect for stage and studio use
• Handles huge transients without distorting
• Increased dynamic range and headroom
• Eliminate noisy ground loops with built-in transformer isolation
• Pristine signal for line level instruments with a ¼” jack input
• No batteries or power supply required thanks to 48V phantom power operation
• Check your 48V phantom power is working with the LED indicator
• Easily reduce input sensitivity for basses and keyboards with the -15dB pad switch
• Hi-impedance thru will not load-down instrument tone
• High-quality powder coat keeps your DI looking great for years to come

Specifications

• Audio circuit type: Proprietary analog circuit with low-noise op-amp
• Frequency response: 20Hz 20kHz (± 1.5 dB)
• Dynamic range: 99dB
• Noise floor: -82dB below 0dBu
• Maximum input: +9dBu
• Phase deviation: +28º at 20Hz | +1º at 1kHz | -2º at 20kHz
• Input impedance: 220k? - ¼" input
• Output impedance: 600? - XLR output
• Input pad: -15dB
• Ground lift: Disconnects pin-1 at XLR output
• XLR configuration: AES standard (pin-2 hot)
• Power: 48V phantom - proprietary digital switching
• Construction: 14 gauge steel chassis and outer shell, baked enamel finish
• Size: 2.75" x 4.25" x 1.75" (70 x 108 x 45mm)
• Weight: 1.2 lb (544 g)