dbx 131s Single 31-Band Constant Q Graphic EQ - Secondhand

Full Description

Streamlined - incredibly deep

Through its 31 bands of audio EQ you can shape your sound exactly how you want with total ease. Allowing you to boost/cut in range of 6 to 12 - it's got plenty of scope to attenuate frequencies you don't want and boosts ones you do. No matter how demanding the job, the dbx 131s can handle it. All without breaking the bank

Stuffed full of features

Alongside the 31-band EQ there is a front panel bypass switch to help you reference the pre-EQ sound during mixdown. 4-segment LED for monitoring output levels help you deal with levels at higher levels. Fully compatible with XLR and TRS inputs and outputs - it's ready for any situation.

Features

• Single 31-band, 1/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of ±6 or ±12dB
• 12dB per octave, 3dB down @ 50Hz low-cut filter
• Front panel bypass switch
• ±12 dB input gain range
• 4-segment LED ladders for monitoring output levels
• XLR and TRS Inputs and Outputs
• Frequency Response of less than 10Hz to more than 50kHz
• Dynamic range of greater than 108dB

Specifications

• Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
• Input Type: Electronically balanced/unbalanced, RF filtered
• Input Impedance: Balanced 40k ohm, unbalanced 20k ohm
• Max Input: >+21dBu balanced or unbalanced
• CMRR: >40dB, typically >55dB at 1kHz
• Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
• Output Type: Impedance-balanced/unbalanced, RF filtered
• Output Impedance: Balanced 100 ohm, unbalanced 50 ohm
• Max Output: >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
• Bandwidth: 20Hz to 20kHz, +0.5/-1dB
• Frequency Response: <10Hz to >50kHz, +0.5/-3dB
• Dynamic Range: Typically >112dB
• Signal to Noise Ratio: Typically >95dB
• THD+Noise: <0.003
• Interchannel Crosstalk: <-90dB, 20Hz to 20kHz
• Bypass Switch: Bypasses the graphic equalizer section in the signal path
• Low cut Switch: Activates the 50Hz 12dB/octave high-pass filter
• Range Switch: Selects either +/- 6dB or +/-12dB slider boost/cut range
• Operating Voltage: 100-240VAC 50/60Hz
• Power Consumption: 15W
• Power Connector: IEC receptacle
• Unit Weight: 4.8 lbs.(2.2 kg)
• Shipping Weight: 6.2 lbs.(2.8kg)
• Dimensions: 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W