DISC Line 6 Pod Studio UX2 and sE Electronics SE2000 MKII Bundle

Full Description

Line 6 Pod Studio UX2 USB Audio Interface

Simple To Use

The Line 6 UX2 is rock solid and ready to go. Extremely easy to use, it has a super-quiet 1/4" guitar input, 1/8" headphone/line output and volume knob for instant straight forward recording.

POD Farm

The POD Farm 2.5 plug-in features tons of models ready to feature on your pro sounding tracks. Over 80 fully adjustable guitar amps, bass amps and preamps are at your disposal. From vintage classics to modern monsters the POD Studio UX2 is primed to deliver powerful Line 6 tones to your DAW. There are also a number of additional model packs which can be purchased from the Line 6 website if you decide you need some extra tones.

User friendly and intuitive, simply drag and drop models into the signal flow, pre or post amp. The carousel style gear browser displays a dream collection of amps and effects for you to choose from. Each fully adjustable model is fully tweakable so you can find your perfect tone incredibly fast and easily. If you want to get playing quick, over a thousand presets provide timless tones in an instant.

To view the full list of included models with the Line 6 Studio UX2 take a look at the PDF below.

Recording

There are many features which make the POD Studio UX2 the professionals' choice when it comes to recording. With 12dB more dynamic range than similar interfaces, the POD studio UX2 is extremely low noise. Latency is a thing of the past with Line 6's exclusive Tone Direct monitoring. This allows you to record using amp and effect modelling without sacrificing tone or feel.

With 44.1/48 kHz 16-/24-bit recording (88.2/96 kHz with sample-rate conversion) the sound is pro studio standard. You can also record a dry signal while monitoring a fully processed POD tone so you arent forced to commiy to a tone until you are completely sure. The UX2 is light, solid and ideal for use with Ableton Live®, GarageBand®, Pro Tools®, Logic® and many other recording platforms. It is compatible with USB 1.1 and 2.0.

sE Electronics SE2000 MKII Condenser Mic with Boom Stand and 3m Cable

The sE Electronics SE2000 is a large diaphragm, cardioid pattern condenser microphone that boasts a broad frequency response and a very subtle presence lift, which makes it ideal for recording studio vocals as well as most acoustic instruments and ensembles. The SE2000 utilises a one inch, centre terminated, gold sputtered mylar diaphragm capsule. This works in conjunction with low noise Class A, FET circuitry and a transformer balanced output stage.

All SE microphones are closely matched, making them ideal for stereo applications, and the SE2000's are particularly recommended for recording vocals and acoustic instruments. 48 Volt phantom power is required. Bundle includes a robust Boom Mic Stand from Gear4music. Height, tilt and swivel adjustable, the stand has a 33" (86cm) boom and has been built to endure daily studio use and the demands of gigging. Also included is an XLR (F) - XLR (M) cable.

Features/specifications

Line 6 Pod Studio UX2 USB Audio Interface

• Lowest noise for recording guitar (12dB more dynamic range than similar interfaces)
• Exclusive latency-killing ToneDirect? monitoring
• Up to 24-bit/96 kHz recording
• POD Farm 2.5 plug-in (Mac® AU/RTAS®/VST® and Windows® RTAS®/VST®)
• Ideal for use with Ableton® Live, Cubase®, Logic®, Garageband®, Pro Tools®, Cakewalk® and other pro recording platforms
• Includes Ableton® Live Lite Line 6 Studio Edition 8-track recording software and RiffWorks? T4 recording software
• USB 1.1 and 2.0 compatible
• 1/4-inch guitar input (normal or pad)
• Two balanced XLR inputs with mic preamps
• Gain knobs
• Phantom power
• 1/4-inch stereo monitor input
• Two 1/4-inch line inputs
• Two balanced 1/4-inch line out
• S/PDIF digital out
• 1/4-inch stereo headphone out with level control
• Assignable VU meters
• USB bus-powered with LED status indicator
• Rock Solid ASIO, WDM and Mac® OS X Drivers

POD Farm

• 18 immortal guitar amps with 24 cabs
• 5 thumping bass amps with 5 cabs
• 29 stunning stompboxes and studio effects (instantly increases to 64 with included FX Junkie model pack!)
• 6 warm and colorful mic preamps

System Requirements

• 512MB RAM minimum (1GB or more recommended)
• 1GB free HD space minimum (10GB or more recommended for recording)
• Drive speed 5400rpm minimum (7200rpm or faster recommended)
• CD-ROM drive
• Internet connection for activation and online features
• One free USB 1.1- or 2.0-compatible port on computer (USB hubs are not supported)
• Mac® AU/RTAS®/VST® and Windows® RTAS®/VST®

• Mac®:
  • G4 800MHz or better
  • OS X 10.4.6 or better
• Windows®:
  • Pentium® IV 1.2GHZ or better
  • Windows XP (SP2) or Windows XP x64, Vista 32-bit and 64-bit, Windows 7

sE Electronics SE2000 MKII Condenser Mic

• Cardioid polar pattern
• 1" Gold-sputtered capsule with mylar diaphragm
• Frequency response of 20Hz-20KHz
• 125 dB Maximum SPL for THD < 0.5
• Sensitivity of >16m V/Pa -36*+/-2dB
• 48V Phantom power necessary
• Output impedance of < 200 Ohms
• Output noise of < 17dB typical (A weighted)
• Rubberised noise-dampening mic clip (included)

Boom Mic Stand

• Mic Thread: 3/8" (10mm)
• Min Stand Height: 35" (90cm) (floor to boom swivel)
• Max Stand Height: 64" (163cm) (floor to boom swivel)
• Folded Length: 36" (93cm)

Cable

• Length: 3m
• Cable Covering: PVC Jacket and insulation
• Spiral Shield: 64x0.12mm spiral shield
• Conductors: 20 x 0.12mm conductors
• Colour: Black