Fostex 6301ND Powered Monitor (single) 20W, 4 Inch

Full Description

Neutral Tone

The Fostex 6301ND Powered Monitor is a compact studio monitor for use in professional, recording, and home studio applications. The full-range 4" driver is powered by a 20W Class D amplifier which features an energy saving auto stand-by function. The drivers produce an extremely flat, neutral tone, ideal for accurate mixing and monitoring. Inputs include a 1/4" unbalanced input and a digital AES/EBU XLR thru connection to provide daisy chaining support for multiple 6301NDs. An input selector is also included for selecting left, right, and left+right on each speaker.

Quick and Easy Adjustments

The Fostex 6301ND Powered Monitor front panel features a power switch along with a rotary level control to provide quick and easy adjustments and tweaks to your audio. The advanced automated protection circuitry is used to prevent overloads and short circuits which provides increased reliability. A standard IEC power cord is included with the 6301ND.

Features

• 20W D-class power amplifier for higher output level and less power consumption with no heat sink
• Dedicated 4-inch full range driver for clear audio reproduction
• Traditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series
• Flat panel design to avoid inadvertent power-off or level change
• Auto Stand-by mode (compliant to ErP directive) for energy saving
• Detachable IEC type power inlet with multi-voltage power handling

Specifications

• Enclosure type: closed
• Unit: 4" full range
• Frequency response: 70 Hz - 15k Hz
• Sound Pressure Level: 85dB / W (1m)
• Maximum SPL: 98dB

• Input
  • Connector: 1/4" TS Phone (unbalanced)
  • Connector: XLR-3-31 (IEC 60958 AES/EBU)
• Output (Thru)
  • Connector: XLR-3-32 (IEC 60958 AES/EBU)
• Input Impedance: 10k ohm or more
• Rated Output: 20W
• Distortion (T.H.D.): 0.05 (1kHz / 1W output)
• Residual Noise: -65dBV or less
• Input Sensitivity:
  • 1/4" TS phone: -14dBV (0.2Vr.m.s.)
  • XLR(Digital): -12dBFS
• Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

• Dimensions: 120 (W) x 189 (H) x 120 (D) mm
• Weight: 2.3kgs
• Power Requirement: AC 100 - 240V (50/60Hz)
• Power Consumption: 10W (less than 0.5W in stand-by mode)